Product ID:EPON RESIN 834
MSDS Date:09/08/1992
FSC:8040
NIIN:00-294-0336
Status Code:A
MSDS Number: CLGSW

Emergency Phone: 800-424-9300

Info Phone: 800-231-6950

Preparer: ERNEST CARTER

Cage: 54527

Telephone: 800-231-6950

Cage: 54527

BISPHENOL A/EPICHLOROHYDRIN EPOXY RESIN

CAS: 25036-25-3

LD50 LC50 Mixture:NONE
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE CONTACT: BASED ON SIMILAR PRODUCT
TESTED PRODUCT MAY BE MODERATELY IRRITATING TO THE EYES. SKIN
CONTACT: BASED ON SIMILAR PRODUCT TESTING PRODUCT MAY BE MODERATELY
IRRITATING TO THE SKIN. INHALA TION: BECAUSE OF ITS LOW VOLATILITY
(SEE SECTION V11) THIS PRODUCT IS NOT LIKELY TO BE AN INHALATION
HAZARD. INGESTION: BASED ON SIMILAR PRODUCT TESTING PRODUCT MAY
HAVE A LOW ORDER OF ACUTE ORAL TOXI CITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION AS NOTED. SKIN SENSITIZATION
(ALLERGY ) MAY BE EVIDENCED BY RASHES, ESPECIALLY HIVES.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND EYE DISORDERS
MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT. PREEXISTING SKIN OR
LUNG ALLERGIES MAY INCREASE THE CHANCE OF DEVELOPING INCREASED
ALLERGY SYMPTOMS FROM EXPOSURE.

First Aid:EYE CONTACT: FLUSH EYES WITH PLENTY OF WATER FOR 15 MINUTES
WHILE HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN CONTACT:
FLUSH SKIN WITH WATER. FOLLOW BY WASHING WITH SOAP AND WATER. GET
MEDICAL A TTENTION. INHALATION: REMOVE VICTIM TO FRESH AIR AND
PROVIDE OXYGEN IF BREATHING IS DIFFICULT. GET MEDICAL ATTENTION.
INGESTION: DO NOT INDUCE VOMITING. IN GENERAL, NO TREATMENT IS
NECESSARY UNLESS Q UANTITIES OF PRODUCT ARE INGESTED. HOWEVER. GET
MEDICAL ADVICE.

Flash Point Method:PMCC
Flash Point:=248.9C, 480.F
Autoignition Temp:Autoignition Temp Text:NONE
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE WATER FOG, "ALCOHOL" FOAM, DRY CHEMICAL OR CO2.
Fire Fighting Procedures:MATERIAL WILL NOT BURN UNLESS PREHEATED. DO
NOT ENTER CONFINED FIRE SPACE WITHOUT FULL BUNKER GEAR (HELMET
WITH FACE SHIELD. BUNKER COATS. GLOVES AND RUBBERBOOTS). INCLUDING
A POSITIVE PRESSURE NIOSH APPROVED SELF CONTAINED BREATHING
APPARATUS. COOL FIRE EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:FUMES AND VAPORS FROM THESE THERMAL AND
CHEMICAL DECOMPOSITIONS VARY WIDELY IN COMPOSITION AND TOXICITY. DO
NOT BREATH FUMES.

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNITABLE. USE
CAUTIOUS JUDGMENT WHEN CLEANING UP LARGE SPILLS. LARGE SPILLS: WEAR
RESPIRATOR AND PROTECTIVE CLOTHING AS APPROPRIATE. SHUT OFF SOURCE
OF LEAK IF SAFE TO D O SO. DIKE AND CONTAIN. REMOVE WITH VACUUM
TRUCKS OR PUMP TO STORAGE/SALVAGE VESSELS. SOAK UP RESIDUE WITH AN
ABSORBENT SUCH AS CLAY, SAND OR OTHER SUITABLE MATERIAL; DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE

Handling and Storage Precautions:HANDLE IN ACCORDANCE WITH THE HAZARD
POTENTIAL OF CURING AGENT (S) USED.
Other Precautions:THE INFORMATION CONTAINED HEREIN IS BASED OT THE DATA
AVAILABLE TO US AND IS BELIEVED TO BE CORRECT. HOWEVER, SHELL MAKES
NO WARRANTY, EXPRESSED OR IMPLIED REGARDING THE ACCURACY OF THESE
DATA OR THE RESULTS TO BE OBTAINED FROM THEW USE THEREOF. SHELL
ASSUMES NO RESPONSIBILITY FOR INJURY FROM THE US E OF THE PRODUCT.

Respiratory Protection:NONE
Ventilation:NONE
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES .
Eye Protection:WEAR SAFETY GLASSES OR GOGGLES AS APPROPRIATE.
Other Protective Equipment:NONE
Work Hygienic Practices:NONE
Supplemental Safety and Health
NONE

Boiling Pt:=260.C, 500.F
Melt/Freeze Pt:M.P/F.P Text:NONE
Decomp Temp:Decomp Text:NONE
Vapor Pres:0.01 AT (MM HG) 77 DEG C
Vapor Density:AIR=1
Spec Gravity:1.19 (H2O=1)
Evaporation Rate & Reference:(N-BUTYL ACETATE =1):Solubility in
Water:NEGLIGIBLE
Appearance and Odor:VERY LIGHT YELLOW, VERY VISCOUS LIQUID.

Stability Indicator/Materials to Avoid:YES
CAN REACT VIGOROUSLY WITH STRONG OXIDIZING AGENTS, STRONG LWEIS OR
MINERAL ACIDS. AND STRONG MINERAL AND ORGANIC BASES/ESPECIALLY
PRIMARY AND SECONDARY ALIPHATIC AMINES. REACTION WITH SOME CURING
AGENTS MAY PRODUCE CONSIDE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES, ACIDS, AND
OTHER ORGANIC SUBSTANCES MAY BE FORMED DURING COMBUSTION OR
ELEVATED (>500 DEG F ) TEMPERATURE DEGRADATION.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:BASED ON INFORMATION AVAILABLE TO SHELL. THIS
PRODUCT DOES NOT CONTAIN ANY CHEMICAL SUBSTANCE REGULATED BY A
SPECIFIC STATE LIST.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.